BENY BBDC40-D 40 kW Dual-Connector Wall-Mounted D | RFQ Sourcing Details

The BENY BBDC40-D is a 40 kW wall-mounted DC EV charger designed for indoor or outdoor installation. It provides two charging outlets and is offered in connector-pair configurations using CCS1, CCS2, CHAdeMO, GB/T, or NACS.

Available combinations include two identical connectors or selected mixed-connector arrangements, allowing a project to specify an interface set appropriate to its vehicle fleet.

Supported configuration and electrical facts The charger uses an AC 400 V ±10%, three-phase input with neutral and protective earth, at 50 or 60 Hz. Its stated rated input current is 68 A. The DC output range is 150–1000 V for CCS1, CCS2, GB/T, and NACS connections, and 150–500 V for CHAdeMO.

The stated output current for the 40 kW model is 0–133.3 A. Published performance figures include efficiency of at least 95%, a power factor of at least 0.99 at full load, and auxiliary consumption of no more than 20 W. The galvanized-sheet enclosure measures 700 × 735 × 325 mm.

The 40 kW model is listed at no more than 85 kg, with a 5 m charging cable, bottom-entry input wiring, and upper outlet wiring. User controls include a 7-inch LCD, LED indication, touch-screen operation, card authorization, and an emergency-stop button.

Network options are Ethernet, 4G, and Wi-Fi, with OCPP 1.6 communication. Environmental specifications include operation from -30°C to +50°C, 5%–95% working humidity, and installation below 2,000 m altitude. The enclosure is rated IP55 and IK10, while the screen is rated IK08.

The listed cooling method is natural cooling. Protection functions stated for the unit include over-voltage, under-voltage, overload, current-leakage, grounding, over-temperature, and lightning-surge protection. A 24-month warranty is listed.

The source also lists CE, CB, UKCA, TÜV, RCM, and UL certificates and references EN/IEC charging and electromagnetic-compatibility standards;buyers should obtain the exact certificates and test documents applicable to the selected configuration and destination market.

Procurement questions to confirm Before ordering, confirm the exact connector pair, simultaneous dual-outlet operating behavior, cable and vehicle-side connector configuration, and whether the selected unit is supplied specifically as the BBDC40-D.

Ask for the final dimensional drawing, mounting requirements, upstream electrical protection, site power requirements, network hardware, OCPP integration details, and commissioning procedure.

Also verify the supplied cooling arrangement, certificate scope, local regulatory acceptance, warranty process, customization limits, package contents, shipment dimensions and weight, and any configuration-specific changes to output current or voltage range.