GS7-AC-B01 Smart Type 2 AC EV Charger, 7 kW / 11 | RFQ Sourcing Details

The GS7-AC-B01 series is a smart AC EV charging platform available in 7 kW, 11 kW, and 22 kW configurations. The stated electrical options are 230 V AC, 32 A, single-phase for the 7 kW version;400 V AC, 16 A, three-phase for the 11 kW version;and 400 V AC, 32 A, three-phase for the 22 kW version.

Frequency is listed as 50/60 Hz. The charger can be installed on a wall or pole and is described for indoor or outdoor use. Supported start methods include plug-and-play, RFID card, and app control.

The listed communication and management capabilities include OCPP 1.6 JSON, scheduling, remote start and stop, charging-status information, session details, dynamic load balancing, and advanced load management. OCPP 2.0, Wi-Fi, Bluetooth, 4G, and Ethernet are identified as optional or configuration-dependent features.

The documented user interface includes a front LED status indicator and an RFID reader using Mifare ISO/IEC 14443 A. Charging-port information identifies Type 2 and GB/T cable configurations, with stated cable-length choices of 3.5 m, 4 m, or 5 m.

Separate product parameters also describe socket and tethered variants, so the required outlet or cable arrangement should be specified when requesting a quotation.

Listed safety provisions include a 30 mA Type A RCD with 6 mA DC leakage detection, emergency stop, PEN fault detection, overcurrent protection, residual-current protection, ground protection, surge protection, overvoltage and undervoltage protection, frequency protection, and temperature protection.

The product information also lists IK10 impact protection and cites CE and RoHS. Applicable certification documentation and the exact ingress-protection rating should be checked for the ordered model because the supplied information contains both IP65 and IP66 references.

Environmental specifications state an operating-temperature range of -25°C to +50°C, 5% to 95% operating humidity, and an operating altitude below 2,000 m. One dimensional specification lists the charger at 340 × 285 × 147 mm with a 5 kg net weight and 7.5 kg gross weight.

Other dimensions also appear for socket and tethered configurations, so buyers should confirm the final enclosure, package dimensions, and weight against the selected version.

Before procurement, confirm the required power rating, phase arrangement, connector format, cable length, mounting method, communication hardware, OCPP version, load-balancing accessories, ingress rating, and certification documents.

Vehicle inlet compatibility, local electrical-code compliance, upstream circuit capacity, protective-device coordination, and installation requirements should be reviewed by a qualified electrical professional for the destination market.